Click image to view full size image
Technical parameter
Cooling water flow: 2L/min | Laminating height: 25mm |
Total power: 65KW | Operate mode: Automatic/Manual |
Heating mode: Heat by oil | Temperature control: Intelligent temperature control |
Temperature uniformity: ±1.5°C | Temperature precise: ≤±1°C |
Temperature range: 30-180°C | Pumping speed:70S/Sec. |
Laminating time: 2-4 Min (Excluding curing time) | Ultimate vacuum: 20-200Pa |
Vacuumizing time:4-6 Min |
3. Main feature and advantage
3.1. Intelligent temperature control system makes the temperature more uniform and liable to set and control.
3.2. Laminating pressure is adjustable and can be adjusted according to the process requirement, which promote the quality of the solar panel.
3.3. Continuously for 24hours.
3.4. The advanced touch screen facilitate the visual operation. Shorten the response time, stablize the performance, and reduce the fault rate.
3.5. Adopt a fully humanized operating system. The whole machine is equipped with many detection switches. In the normal production , operators will only be required to put the modules on the heating plate and press the loading switch. The equipment will laminate , cure and open cover automatically and wait for operator to start the next cycle.
Solar Laminator
